亚洲一级黄片,国产一级性爱片,亚洲男人天堂,无码高清在线

Performance advantage of Shandong CNC lathe
Shandong CNC lathe is in accordance with the preparation of a good pre-processing procedures, the processing of parts to be processed automatically. We have the parts of the processing process line, process parameters, tool movement trajectory, displacement, cutting parameters (spindle speed, feed, back to eat knife, etc.) and auxiliary functions (tool change, spindle forward, Cutting fluid on, off, etc.), in accordance with the provisions of the NC machine tool code and program format written into the processing program, and then the contents of this program recorded on the control medium (such as perforated tape, tape, disk, ), And then input to the CNC machine tool CNC device, which command machine parts processing.
Shandong CNC lathe performance advantages:
1, the whole castings are made of high-grade cast iron cast HT250, have been completely annealed to eliminate residual stress, long deformation.
2, base and Y-axis guide surface as one casting structure, chassis stability, rigidity.
3, the rail for the Taiwan Hiwin silver linear guide, the use of fully support design, in the effective travel within any mobile position, is still fully supported by the slide, no floating phenomenon, to ensure cutting stability, chute accuracy and mechanical life.
4, three-axis C3-level precision double-nut ball screw, the heat treatment and precision grinding in the week, the axis of the pre-pull to reduce the heat distortion, positioning and repeat the high precision.
5, all machines factory 100% through the Renishaw laser interferometer accurate detection, to ensure that the three-axis precision backlash, to ensure positioning accuracy: ± 0.01 / 300mm Repeatability: ± 0.005 / 300mm.
6, three axes are servo drive, smooth transmission, high precision, large torque.
7, three-axis track to dust and dust from the crimp cover, protect the track and the ball screw and cutting water, leaving the material into the wear and tear.
8, CNC system using a wide number of 218M CNC machining center system, applicable to international common procedures, with automatic tapping, automatic fault detection alarm function, power memory function.
9, the spindle is BT30, transfer cutting torque, configuration 6 knife knife library, can greatly improve the processing efficiency of complex products and processing accuracy.
10, the spindle motor with 2.2Kw servo spindle motor and drive, power, spindle can change tool, to meet the automatic tapping function.
11, BT30-6 knife knife-style knife library, tool change time is short, tool change safe and reliable.
12, electronic hand wheel adjustable third gear to facilitate the operation and the knife.
13, column plus balance counterweight, the spindle running smoothly.
14, configuration intermittent lubrication system, the whole protection structure and configuration pneumatic broach system.